Cryo No invasive Cryolipolysis Fat Freezing Machine Coolplas vacuum
cryotherapy fat freezing fat cell body melting
Features--- fat freezing machine
|1. Vacuum pump imported made from Japen brand|
|2. Non-invasive, clients can read, listen to music or using laptop
during the treatment.|
|3. Anti-frostbite membranes--origisnal design of Sincoheren for
better skin protection with high customer satisfaction.|
|4. 3 handpieces, 2 handpieces working together, L size can be
applied to special clients|
|5. Automatic massage during treatment, making the whole process
|6. Emergency stop button|
|7. Lowest tempreture:-11|
|8. Temperature controller, Safer and more advanced than liposuction|
How does coolplas work?
The treatment cup can absorb the fat in the treatment area to the
cooling plate by a vacuum pressure. And the treatment probe can
control the cooling temperature precisely during the treatment,
which can eliminate fat cells in a particular part of the body.
When the fat cells are in the cooling enviromnent which be
precisely controlled, it will begin to do natural decomposition and
clearance, to make the fat layer become thinner gradually.
Fat cells reducing process
1. Some stubborn fat bulges are immune to diet and exercise
2. Coolplas targets and cools fat cells to temperatures that
trigger fat cell apoptosis.
3. No damage to nerves or other tissues because lipids in fat
crystalize at a warmer temperature than water in other cell types.
4. Following treatment, fat cells enter an apoptotic death sequence
and are gradually removed in the next few weeks and months by the
5. Fat layer thickness significantly reduced.
6. Fat layer reduction in targeted area leads to an improvement in
1. Most popular way in losing weight In the market!
2. Special design for handpeice, no any pain feeling when finished
3. No surgery, no anesthesia, no needles, no scarring, no downtime.
4. Single treatment can reduce 20-30% reduction in the fat layer
5. The CoolipoTwin Procedure is comfortable for most patients; They
can read, work on their laptop computer, listen to music
6. Automatic adjustment of vacuum pressure control, very little
noise at work.
Description of System Components
Colorful LCD touch screen: display specific information of
Key Switch: power on and off
Main console: in-built cooling system, power system, control
system, integrated circuit etc.
Middle size hand piece: cavity area: 250mm×50mm×115mm; effective
treatment area: 156mm×86mm ；
Small size hand piece:cavity area: 145mm×50mm×93mm；effective
Small size hand piece (flat open mouth):cavity area:
140mm×50mm×98mm；effective treatment area:92mm×66mm;
Handpiece Plug: Connection treatment handpiece and host
Handpiece holder: holding treatment handpiece
Preparations Before Operation
1) Recommended treatment parts: the upper arm, back, abdomen, love
handle, leg and buttock;
2) Measure fat thickness of treatment part;
3) 10-60min; Set treatment time 10-60min based on fat thickness of
4) Treatment area should be kept small; a large patch of treatment
area could be divided into several small parts.
5) Number of treatment parts for each time should be below 2. The
same treatment areas should not take second treatment within 2
months. Different treatment areas can take second treatment after 1
month. Then extra fat thickness can be reduced and burden of
6) Generally, it is suggested to carry out treatment based on
provided clinical parameters, temperature range is from 0℃ to -8℃;
if the operator is a professional doctor, temperature can be
adjusted combining relevant factors. The temperature should not be
1) Check whether patient’s heartbeat is normal and consult whether
he or she has other contraindications (for detailed information,
see 5.2 contraindications);
2) Measure fat thickness of treatment part ;
3) Clean treatment part;
4) Mark treatment area;
5) Unpack small packet of gelpad, and wipe handpiece edge and
6) unpack big packet of gelpad, and apply it into treatment area.
7) patient shall be in a sitting posture and the upper body should
be kept 90 degree with thigh;
8) Choose proper treatment handpiece based on fat thickness.
9) Start the equipment, and operate according to device operation
interface and complete parameters setting;
10) Gentlely apply treatment handpiece cavity on treatment area and
click button on handpiece;
11) In order to make sure that handpiece is closely touched on
treatment areas, press it and lightly swing it up and down and then
12) Click the button on handpiece, start treatment.